Troubleshooting -

1
First, attach both clamp-on net posts in the center of the table.


Step 1: Slide looped end of net onto one post, open velcro straps on the other end of the net.


Step 2: Stretch the lower velcro strap around the post and attach to itself.


Step 3: Stretch the uppper velcro strap around the post and attach to itself.


For additional instructions please view the 5A-6700-00 Quick Play Net on the the Product Manual page.
thmn2.jpg
Step 1 (Click on image for larger view)
thmn3.jpg
Step 2 (Click on image for larger view)
thmn1.jpg
Step 3 (Click on image for larger view)
thmn4.jpg
Net installed (Click on image for larger view)
2
Please make sure after installing your locks that they are able to move freely. Do not tighten the screw so the lock will not be able to move. It must be able to flip on its own as the table passes over the lock.
thmt5.jpg
Click on image for larger view
thmt2.jpg
Click on image for larger view
thmt3.jpg
Click on image for larger view
thmt4.jpg
Click on image for larger view
thmt1.jpg
Click on image for larger view.
4
Since this is a wood product, the flatness of a Table Tennis Table depends on temperature and humidity conditions. If a table is folded up when not in use, the effect of temperature and humidity is reduced. This holds the boards straight up and down, not allowing gravity to work on the boards. According to our engineering department and the board manufacturer, if you would fold up the table when not in use, you should see the situation reverse.

Please note that if a surface does have a "bow" in it, it should only affect ball movement at minimal levels. Generally the issue is strictly an aesthetic concern and not with playability.
<< Back